JIEKES, inline moisture meter, solid flow meter, dust monitor, weight and tape level transmitter, rotary blade level meter,sinus pinch valves etc.

Current Location: Home > 产品

found:100 please select a view type
Continuous Inline Moisture Measuring SystemHUMY3000
Continuous Inline Moisture Measuring SystemHUMY3000 [MuTec]
The moisture in solids is an important parameter which strongly influences the quality of the product and can increase the economic efficiency of a production fundamentally. HUMY3000 is in many processes successfully in use, e.g. for sugar, tobacco, grain, malt, flour, coal, sand, wood shavings, dried food, fertilizer, powder, pigments and plastic granules.As installation places conveyor belts, screw conveyors, silos, funnels are particularly suitable. The inline moisture measurement is also possible in batch processes.Main Benefits:● No samples for the laboratory necessary● Saving of energy costs● Improvement on the product quality● Very short amortization time● High selective sensitiveness● High measuring speed● Precision better than 0.1% (depends on product)● Easy and economic installation●Fast and simple calibration●Optional ATEX-Version for zone 20 and zone 0 
Mass Flow Measurement for Bulk MaterialsMF3000
Mass Flow Measurement for Bulk MaterialsMF3000 [MuTec]
Our solid flow meter MF 3000 is designed for flow measurement in metallic pipes from a few kg / h to many t / h. The system is suitable for on- line measurements of powders, dusts, pellets, and granules from 1 nm up to 2 cm in pneumatic or free fall conditions.The measurement principle of the MF 3000 is based on the physical Doppler-Effect, whereas the sensor generates a uniform field in the microwave frequency range inside the pipe. These microwaves are being reflected by particles passing through the pipe. Calculation of frequency and amplitude changes allows for accurate determination of solid flow. Non- moving particles like dust accumulation are excluded from the calculation.The installation is simple and cost effective via a welded branch, through which the sensor is screwed flush to the inside of the pipe. The sensor is connected to a DIN-rail mounted transmitter with 4...20 mA, RS232 and RS485 output. The calibration is easy by using our MF– SMART software and a reference flow value.Main Benefits:● For pneumatic conveyors and free falling processes; ● For all solid materials from a few kg/h to many t/h; ● No armatures inside the pipe and inside flush fitting; ● Very fast and contactless measurement; ● Easy, quick and cost effective installation and start-up; ● Galvanic separated DIN-Rail Transmitter with RS232- and RS485-Interface; ● Robust stainless steel version, abrasion and maintenance free;● Limit value monitoring with alarm contact; ● Sensor-transmitter distance up to 2.000 m; ● Easy and quick calibration; ● Adjustable sensitivity; ● Optional: ATEX for Zone 20 and Zone 2; 
FlowSlide for Solid Flow MeasurementFlowSlide
FlowSlide for Solid Flow MeasurementFlowSlide [HENSE]
The FlowSlide is one of the most accurate flow measuring systems for free flowing solids.The measured product is guided over a circular slide chute. It then creates a centripetal force, which is directly proportional to flow rate. Because of the special design, the frictional forces cause the measuring slide to lift - so the measurement is largely unaffected regardless of bulk density, grain size and elasticity. The system can be factory calibrated with superb accuracy.The FlowSlide - system is delivered with a “self cleaning” - function based on pneumatic air nozzles.Advantages· Measurement independent from grain size and density·Excellent repeatability and accuracy·factory calibrated·very low maintenance 
Microwave Barrier LevelCheck 510M LC500M
Microwave Barrier LevelCheck 510M LC500M [MuTec]
The LevelCheck 510M microwave barrier is used to monitor limit levels of solids in silos, containers, storage tanks, pipe systems, etc. Additional applications include: blockage reports, counting piece goods, or positioning objects. The systems are certified up to ATEX Zone 20 and optionally authorised up to a process pressure of 25 bar. The measurement process of the LevelCheck 510M is based on the newest microwave technology, whereby the transmitter sends out a microwave signal which is analysed by the opposite receiver. Material which builds up within this field attenuates its signal effect, and this is then converted into a switching procedure. The measurement is contactless. The sensitivity, signal attenuation and signal hysteresis of the microwave barrier can easily be set continuously and precisely using the bar graph display. This allows for a variable determination of the switching point or a switching process for different process parameters.Main Benefits:● Reliablemicrowave measuringprinciple● Self-monitoring with additional relay● For level monitoring● Adjustable sensitivity, damping, hysteresis and filter function● Adjustment via 2 key buttons and bargraph● Easy installation by compact form● Process connection with flange, thread, etc.
Dust Monitor for Detecting Filter Malfunctions FS700E01
Dust Monitor for Detecting Filter Malfunctions FS700E01 [MuTec]
The FlowSwitch 700E dust monitor is used to detect filter malfunctions caused by cracks or installation defects, for instance. The triboelectric measurement principle makes it possible to reliably detect dust penetration.Main Benefits:●  Maintenance free●  Adjustable sensitivity●  Adjustable switch●  Condition indication with LED●  Stainless steel housing●  Compact form●  Easy installation
High Speed SIL2-thermocouple TransmitterMTP 300i SIL
High Speed SIL2-thermocouple TransmitterMTP 300i SIL [MuTec]
Powerful Properties:2-wire temperature transmitter for DIN rails2 galvanic isolated TC-inputs with cold-junction compensationSignal pass-through time:     without Butterworth filter ≤ 3 ms      with Butterworth filter ≤ 38 msInstallation in zone 1 or 2 permissibleIntrinsic safety according to IEC/EN 60079-11Error indication according to NAMUR NE 43Green LED for Signal indicationEasy operation:Power supply via rail or terminalSimple assemblingCertified:SIL2 according to IEC/EN 61508:2010IECEx - Ex ib [ia Ga] IIC T4 GbATEX II 2 (1) G Ex ib[ia] IIC T4
Weight and tape level transmitterLJ20
Weight and tape level transmitterLJ20 [MOLLET]
Reliable continuous level measurement in silos, vessels and hoppers filled with dusty, powdery, granulated and grained bulk materials any kind like gravel, sand, cement, concrete, lime, gypsum, broken stones, animal feed, fishmeal, milk powder, grain, spices, salt, sugar, flour, coffee, cacao, cereals, graphite, fertilizer, zinc sulfate, aluminum oxide, polystyrene, plastic granulate, plastic powder, filler, wood pellets, wood chips, sawdust, foam flakes, ash, fly-ash, slag, carbon black, coal, coke dust and many others more.Interface measurement and level measurement of liquids are possible as well.Product features:Reliable continuous level measurement up to a silo height of 42 mMeasurement technology unaffected from characteristics like dust, moisture, conductivity or grain size of the bulk materialMeasurement in silos with a process temperatures up to 150 °C possibleNo influence on the measurement process by internals in silos or vesselsHigh measurement accuracy of the actual filling level of ±2.5 cmA four-line plain text display enables an easy menu-guided commissioning and local operationUse in dust incendive hazard areas possible, category 1/2D4 - 20 mA current output and maximum 4 freely programmable signal outputsProtection type IP 67 according EN 60529Compact and still robust design with low weightSpecial designed tape wiper avoids pollution of internal housingNo movement into silo outlet due to fully electronic digital minimum fail-safe mode
TMT Portable Tobacco Moisture TesterTMT
TMT Portable Tobacco Moisture TesterTMT [AgraTronix]
Main Benefits:• Direct readout in 1/10 of 1% increments• Field tested and factory calibrated• Solid state microprocessor electronics• Tobacco bale density compensation• Automatic temperature compensation• Adjustable scale function• Tester enclosure and extra-rugged probe shaft made of aircraft aluminum• 18” probe attaches in seconds• 9V battery not included
Rotary blade level indicator DJ21
Rotary blade level indicator DJ21 [MOLLET]
The rotary paddle level indicator DF21 is used in most bulk solids for full-, empty or demand-detection within silos and bins. The individual sensor configuration with a large number of options and a lot of accessories enables an accurate adaptation to any specific application.Product Features:unaffected by pressure, temperature, dust, caking, and conductivity of materialto be used in all areas with potentially explosive atmospheres as wellversatile and universally applicablefantastic price-performance-ratiojib extension up to 1.000 mm maximum lengthhigh reliabilitycontinuous operation without maintenanceeasy installation
Load cell for silos, tanks and hoppersSafemount
Load cell for silos, tanks and hoppersSafemount [HENSE]
The unique design of the Safemount load cells offers safe, precise and simple weighing for silos, agitators and tanks. The force guiding into the double shear beam guarantees high resistance against lateral forces and thermal expansion. A totally stainless steel module is also available.The “Safemount” Load cell is very easy to install - the double shear beam load sensor can be exchanged without lifting tools. The built in rod- and stay bar security allows for some horizontal forces and thermal expansion of the vessel.For low cost weighing solutions we offer a range ”dummy load cells“ that can be combined with the ”Safemount“ or ”Baby-Safemount“ Load cells. The ”dummy load cells“ can also be used to protect the life of the load cells during mounting or welding.Advantagesone size for capacities from 5t to 150tno rods or stay bars required*low vertical heightStainless steel load cell IP 67 - module with nylon coatingGuaranteed up to 5 yearsVery economicExplosion approval according to ATEX II 1 GD EEx ia IIC T6ATEX approval for Zone 22 does not require safety barriersoptional complete unit in stainless steelTÜV approval (50 & 60 t)* subject to static testing
Rotary blade level indicator DJ11
Rotary blade level indicator DJ11 [MOLLET]
The rotary paddle level indicator DF11 is used in most bulk solids for full-, empty or demand-detection within silos and bins. The sensors can be adjusted to the requirements of many applications with a limited number of options and accessories. Product Featuresunaffected by dust, caking, and conductivity of materialto be used in areas with potentially dust explosive atmospheres as wellversatile and universally applicableunbeatable price-performance-ratiojib extension up to 2.000 mm maximum lengthhigh reliabilitycontinuous operation without maintenanceeasy installation
Sinus pinch valve QV-RR
Sinus pinch valve QV-RR [MOLLET]
These valves are suitable for shutting off, distributing and metering of powdery and grained bulk goods, for viscous, soiled and aggressive liquids, gases and mixtures. The cylindrical, elastic hose will be squeezed by compressed air or water pressure. Thus the pinch valve is closed. After release of the control pressure, the hose opens and returns in its original and circular shape.  Product featurestube connection on both sidesstraight and not narrowed passageno jamno pressure dropoperation with less abrasionlong service live of hoseseasy change of hosessafe to operate due to simple constructionsuitable for explosive areas as well
MWF Microwave level transmitterMWJ27
MWF Microwave level transmitterMWJ27 [MOLLET]
The devices of the MOLOSwave series for continuous level measurement are working with the Time Domain Reflectometry (TDR) measurement principle. They are specifically designed for the use in bulk goods. During the measurement high frequency microwave pulses with low energy are coupled onto the probe and guided along this probe to the bulk goods. The product surface partly reflects these pulses. The electronic detects the reflected pulses and calculates the actual filling level from the time difference of the transmitted and received signals. These filling levels are made available as a 4-20 mA signal for further signal processing. This signal can be visualized with easy to use and well legible indicating units that are mounted in a switch cabinet.Product features: Use in dust explosive areas with ATEX zone 20/21 possibleMeasuring range MWF 21 with rod probe up to 3 mMeasuring range MWF 27 with cable probe up to 20 mHigh measurement accuracyHighest level of functional safety through the use of 4- wire technologyIndependent of bulk solids featuresInsensitive against dust, buildup and condensationVery good price-performance-ratioWear and maintenance-free operationHigh tolerance of interfering signalsDifferent probes availableDifferent process connections (threads, flanges, Tri-Clamp, …)Housing made of Aluminium or stainless steel
MIC-Smart Microwave Measuring SystemMIC-Smart
MIC-Smart Microwave Measuring SystemMIC-Smart [HENSE]
The simple and reliable flow measurement for solids in pneumatic- and gravimetric conveying systemsThe MIC Microwave Measuring System consists of a sensor head with stainless steel pipe that acts as a waveguide and the electronic unit. To mount the equipment a hole for the mounting plug is first drilled in the conduit. The sensor is installed in line with the wall and therefore is wear-free.The system is virtually unaffected by pressure and temperature and provides a typical accuracy within +/- 5 % in pneumatic conveying systems (with even deviation of the product). The MIC sensor can be use to monitor and control the solid flow in vertical pipes and pneumatic feed lines. For pipe diameters above 250mm it could be necessary to install 2 or 3 sensors for a better average of the particle flow profile.The sensor face transmits a frequency of 24 GHz to the powder or grain material. The pulses are reflected from the particles and analysed via a special algorithm. The result is a flow proportional current output that is amplified and conditioned inside the remote electronic unit. The instrumentation displays the flow value direct in kg/h and in absolute quantity (kg) (t).Advantagessimple installation in existing pipe workmeasurement flush with wall and non-contactmaintenance-freedetects only "moving" particleshigh operating safetysuitable even for very small flow rates
Relay BoardREG242
Relay BoardREG242 [MuTec]
SHORT DESCRIPTION4-channel relay board for an operation with small currents and voltagesPin-compatible to MC73-481-R from TurckRelay activation also with AC voltage possibleSafe galvanic isolation of control and contact circuitFour relays with two changeover contacts eachForm of construction: 19“, 4TE, 3HEFURTHER VERSIONSREG 222:4-times relay board with two channel pairsREG 241:4-channel relay boardREG 243:4-channel relay board with activation with 230 VACREG 281:8-channel relay board with one N/O contact for each channelREG 282:8-channel relay board with one changeover contacts for each channel 
SIL2-Transmitter power supply MSK 200-E
SIL2-Transmitter power supply MSK 200-E [MuTec]
SHORT DESCRIPTION1-channel measuring transmitter supply unit in DuoTec-Failsafe Technology with self-monitoring for the supply of 2-wire transmittersCertified according to IEC 61508 SIL2Output: 0/4-20 mA, 1-5/0-10 VDC4 individually adjustable limit values(2 relays contact outputs, 2 transistor output)1 service alarmSafe galvanical separation between auxiliary energy, input and outputExecuted on Namur recommendation NE 21HART-protocol sockets at the frontRS 485-interface at the edge of the measuring devicePC-connection via MÜTEC interface cable at the frontConfiguration ON-LINE by MÜTEC-WINSMART softwareAuxiliary energy: 24VDC/ACForm of construction: 19“, 4TE, 3HEOPTION "IEXA"Input II (1) G Ex ia IIC, (zone 0) 
Continuous Inline Moisture Measuring SystemHUMY3000
Continuous Inline Moisture Measuring System
[HUMY3000]
Mass Flow Measurement for Bulk MaterialsMF3000
Mass Flow Measurement for Bulk Materials
[MF3000]
FlowSlide for Solid Flow MeasurementFlowSlide
FlowSlide for Solid Flow Measurement
[FlowSlide]
Microwave Barrier LevelCheck 510M LC500M
Microwave Barrier LevelCheck 510M
[LC500M]
Dust Monitor for Detecting Filter Malfunctions FS700E01
Dust Monitor for Detecting Filter Malfunctions
[FS700E01]
High Speed SIL2-thermocouple TransmitterMTP 300i SIL
High Speed SIL2-thermocouple Transmitter
[MTP 300i SIL]
Weight and tape level transmitterLJ20
Weight and tape level transmitter
[LJ20]
TMT Portable Tobacco Moisture TesterTMT
TMT Portable Tobacco Moisture Tester
[TMT]
Rotary blade level indicator DJ21
Rotary blade level indicator
[DJ21]
Load cell for silos, tanks and hoppersSafemount
Load cell for silos, tanks and hoppers
[Safemount]
Rotary blade level indicator DJ11
Rotary blade level indicator
[DJ11]
Sinus pinch valve QV-RR
Sinus pinch valve
[QV-RR]
MWF Microwave level transmitterMWJ27
MWF Microwave level transmitter
[MWJ27]
MIC-Smart Microwave Measuring SystemMIC-Smart
MIC-Smart Microwave Measuring System
[MIC-Smart]
Relay BoardREG242
Relay Board
[REG242]
SIL2-Transmitter power supply MSK 200-E
SIL2-Transmitter power supply
[MSK 200-E]
Total 100 items/16 items per page First Previous 1 2 3 4 5 6 7Next End

morePrint | Website Map | Jiekes·China 2020

Products Brand Classific Application News About us
MuTec
MOLLET
HENSE
BlueLevel
AgraTronix
Sintrol
PTL
Expert Knowledge
Technical Articles
Solution
Download
Video
Latest News
Events
Exhibition
Company Profile
Brand Meaning
Company Culture
Job Offers
Service Team

What can We do for you?

Please send E-mail to us
Please leave a message
china@jiekes.com
Please leave a message
If you want more informations, please leave a message.
Online message
Please call us
If you require anything , please dial 400 freephone to call us.
4006 911718